XADO Atomex Tire sealant

New XADO Atomex Tire sealant

Atomex Tire sealant


For sealing tires with or without hose, on steel or cast irons.

For use on tires of cars and small trucks.


Detailed specifications


  • Seals the tire with a pressure loss within 1 minute.
  • The balancing of the wheels is not impaired.
  • Leaks are reliably sealed.
  • No freezing in frost or cold weather.



Possibly. in the tire. Turn the wheel until the valve is at the bottom and let the air out of the tire until the rim touches the ground. The temperature of the sealant must not be less than + 15 ° C. In the cold season, warm the tank on the heating fan of the vehicle. Never heat the container over an open flame! Shake the container vigorously. Fasten the connector of a plastic hose of the container tightly to the thread of the valve of a tire. Hold the container with the cap up. Remove the cap of the cap, press and hold the cap at the same time. Fill the contents of the container completely into the tire. Fill the tire to 80% of the specified tire pressure.


The agent should not be used for sealing tires with a small filling volume, such as mopeds or bicycle tires, as the risk of damage to the tires can not be excluded by excessively high pressure.

The medium is not applicable for pressure loss due to a defective valve or a defective tire bead (on the rim rim).


Combination of organic solvents, carboxylic acid, adhesion additives, hydrocarbon propellant gas.

XA 40040 Spray can 500 ml

Write a review

Note: HTML is not translated!
    Bad           Good
  • Views: 4714
  • Product Code: Atomex Riepu hermētiķis
  • Availability: In Stock
  • 8.50€
  • Ex Tax: 8.50€

Tags: XA 40040